Garmin G600 Pilot's Manual page 66

3.3.6 Panning
The Panning Map Page function allows you to move the map beyond its
current limits without adjusting the map scale and to examine information at
the pointer location. When you select the panning function — by pressing the
small MFD knob — a target pointer flashes on the map display. A window also
appears at the top of the map display showing the latitude/longitude position of
the pointer, the ETE from your present position to the pointer, elevation at the
pointer, and bearing and distance to the pointer from your present position.
Information is related
to the tip of the pointer
Map Pointer
Figure 3-8 Navigation Map Pointer Location Information
1) While viewing a Map or Chart page, press the small MFD knob. A flashing
pointer will appear in the center of the map page. The measured information is
referenced to the tip of the arrow.
Figure 3-9 Navigation Map Initial Pointer Location
2) Turn the large MFD knob to move the cursor horizontally. Turn the small MFD
knob to move the cursor vertically.
3) Press the small MFD knob again to cancel panning. The map view will return to
the normal view with your present position centered on the map.
3-8
ETE from present position
to tip of pointer
Elevation at Pointer
Present Position
Garmin G600 Pilot's Guide
Lat/Lon at Pointer
190-00601-02 Rev. B