Table of Contents
Advertisement
Quick Links
IT
ISTRUZIONI CENTRALE DI COMANDO A24
CONTROL UNIT A24 INSTRUCTIONS
EN
FR
INSTRUCTIONS CENTRALE DE COMMANDE A24
DE
BEDIENUNGSANLEITUNG STEUERZENTRALE A24
0000
ANT
A24
FCO
COM
FCC
E
S1
+24V-
+ 5V -
M1
Moving Ideas.
Stagnoli s.r.l. - via Mantova Traversa 1, 105 a/b
25017 Lonato - Brescia - Italia
tel (+39) 030.9139511 fax (+39) 030.9139580
www.stagnoli.com
24VAC
S2
M2
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stagnoli A24
Summary of Contents for Stagnoli A24
- Page 1 CONTROL UNIT A24 INSTRUCTIONS INSTRUCTIONS CENTRALE DE COMMANDE A24 BEDIENUNGSANLEITUNG STEUERZENTRALE A24 0000 24VAC +24V- + 5V - Moving Ideas. Stagnoli s.r.l. - via Mantova Traversa 1, 105 a/b 25017 Lonato - Brescia - Italia tel (+39) 030.9139511 fax (+39) 030.9139580 www.stagnoli.com...
-
Page 2: Technical Data
INSTALLATION AND PROGRAMMING INSTRUCTIONS This manual is intended for qualified technical personnel responsible for installations. Please read these instructions carefully prior to installation. Improper use of the product or a connection error could affect proper operation and end user safety. TECHNICAL DATA Supply power: 230V ~ ±10% - 50Hz MAX flashing light output power: 24V~ - 25W... -
Page 3: Electrical Connections
FIG 2 0000 24VAC +24V- + 5V - ENCODER ENCODER *ENCODER WIRING green = signal white = - brown = + BATTERY BATTERY Automatic Manual 0000 Trasfor Board HERMES 200/250 24VAC +24V- + 5V - www.stagnoli.com... -
Page 4: Navigating The Menu
The last two digits indicate the number of TX stored. SETTING THE LANGUAGE Stagnoli control units are available in 4 different languages: ITALIAN - ENGLISH - FRENCH - SPANISH The default language on the control unit is English. To change language, access the menu by pressing button "E", then press the down arrow four (4) times and then "E"... -
Page 5: Menu Diagram
Open/close space [1x10cm] ralL operation Preflashing Opening force Operation with 1 Closing force [%] motor OPEN/CLOSE Movement MANNED speed operation Fixed code Strike space [cm] enable Relax time Ramming Tinv [1x10ms] operation Electric lock time TAUX Motor type Tipe www.stagnoli.com... -
Page 6: Description Of Parameters
MEMORISING ONE OR MORE RADIO CONTROLS Stagnoli control units can memorise 76 transmitters per channel in both rollingcode and fixed code. They are set by default to memorise Stagnoli Rollingcode transmitters. To memorise fixed codes, modify “CF” parameters in the "FUNCTIONS" menu. -
Page 7: Description Of Functions
If not, exit. If you press ENTER, the message PRG will appear on the screen to indi- cate that resetting is in progress. To erase a radio control from Stagnoli control units, it is necessary to have the radio control on hand. Enter the ERASE 1 ERASE 1 tx TX option and press the button of the transmitter that must be cancelled. -
Page 8: Final Testing
FINAL TESTING Always perform final testing after having completed all programming: • Unlock motors and make sure that the leaves move freely with a force lower than 390Nm, then re-lock them. • Check correct operation of protective devices (anti-crushing system, stop button, photocells, etc.). •...
Need help?
Do you have a question about the A24 and is the answer not in the manual?
Questions and answers