Advertisement
6. Updating The Firmware
Firmware updates allows easy and rapid turnaround low level changes to the core MimicsLT operating
system. After loading the MicroSD Card with the firmware files you can plug in the SDcard at any time
and it will automatically update!
To upload new firmware.
Download the latest firmware specific for your device/platform (zip file) from the customGadz
•
website.
http://www.customgadz.com/downloads/
Extract the contents of the .zip file and put all 3 files onto a MicroSD card (not supplied). You
•
should see the following 3 files.
Inset the MicroSD card into the MimicsX2 main board and wait approximately 7 seconds to the
•
new firmware to be updated.
9
Firmware update files
Firmware update indicator
Green LED flashes during
firmware update procedure.
Advertisement
