Advertisement
®
Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
A. Frame Pool Surface Skimmer
1
1
5
Insert the Frame Pool Holding Frame 1 into the
Skimmer Canister 4 . Put the Lock Nut 5 onto
the screw hole of the Skimmer Canister 4 .
4
Clamp Lock Screw
Hang the Frame Pool Surface Skimmer onto the top
pole of the frame pool and then turn the Clamp Lock
Screw in clockwise to tighten the Skimmer by hand.
2
SETUP INSTRUCTIONS
2
5
4
Turn the Lock Nut 5 in clockwise to tighten the
Frame Pool Holding Frame 1 by hand.
5
Tighten
Loosen
Loosen the Lock Nut 5 in anti-clockwise by hand
and adjust the position of the Skimmer Canister 1
on the Frame Pool Holding Frame 1 . The position of
the Skimmer Canister 1 should be set as the pool
water surface between the water level marking on the
Skimmer Canister 1 . Tighten the Lock Nut 5 in
clockwise to hold the Skimmer Canister 4 in your
setting position.
3
1
Insert the Skimmer Basket 6 into the Skimmer
Canister 4 . Connect the hose into the hose
connector on the bottom of the Skimmer Canister
4 and fasten the hose by hose clamp.
6.1
1
5
4
Suction
Fitting
If the Suction Sitting of your pool is the same type as
illustrated in 6.1, attach the Adapter
Fitting and screw tightly.
6
4
9
8
1
7A
9
8
7A
to the Suction
7A
Advertisement
