Table of Contents
Advertisement
Available languages
Available languages
Function(Optional)
Comfort Vane Operation
This function conveniently sets the vane to a preset
directly onto the occupants in the room.
1
Turn the appliance on.
2
Press
select the desired direction.
or
is displayed on the display screen.
NOTE
or
is displayed on some indoor units.
This function is disabled when you press MODE or
JET MODE button.
This function is disabled and auto swing of vertical
direction is set up when you press
When this function is off, the horizontal vane
operates automatically depending on the set mode.
Using the Energy Saving
Function (Optional)
This function minimizes power consumption
during Cooling and increases the set
temperature to the optimal level for a more
comfortable environment. The temperature
automatically settles at 22 °C if desired
temperature is below 22 °C The temperature
remains constant if it is above 22 °C
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Cooling Mode.
3
Press ENERGY SAVING button.
•
is displayed on the display screen.
button repeatedly and
button.
Function(Optional)
1
Turn the appliance on.
2
Press
Press
select each step.
NOTE
1 step : The power Input is decreased by 20%
compared to rated power input.
is displayed on the display screen.
2 step : The power Input is decreased by 40%
compared to rated power input.
is displayed on the display screen.
3 step(Optional) : The power Input is decreased by
60% compared to rated power input.
is displayed on the display screen.
(1 step),
(2 step) is displayed on some indoor
units.
This function is available with Cooling Mode.
Capacity may decrease when Energy Control mode
is selected.
Desired temperature is displayed about 5 seconds
if you press FAN SPEED,
Room temperature is displayed about 5 seconds if
you press ROOM TEMP button.
When connected to the Multi Outdoor unit, this
function may not be supported.
button.
button repeatedly to
or
button.
Advertisement
Chapters
Table of Contents
