Using The Jet Mode Function - LG AMNQ18GSKAA Owner's Manual

This mode removes excess moisture from a highly
humid environment or during the rainy season,
in order to prevent molding from setting in. This
mode adjusts the room temperature and the fan
speed automatically to maintain the optimal level of
humidity.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
is displayed on the display screen.
NOTE
In this mode you cannot adjust the room
temperature, it is adjusted automatically.
The room temperature is not displayed on the
display screen.
Fan Mode
This mode only circulates the indoor air without
changing the room temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the Fan
Mode.
is displayed on the display screen.
3
Press FAN SPEED button to adjust the fan
speed.
Multi Model
This mode automatically sets the fan speed and
temperature depending on the room
temperature.
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
Auto Operation.
• is displayed on the display screen.
3
Press or button to select the desired
operation code if the temperature is higher
or lower than the desired temperature.
Code
2 Cold
1 A little cold
0 Maintain room temperature
-1 A little hot
-2 Hot
NOTE
• In this mode, you cannot adjust the fan speed,
but you can set the air deflector to rotate
automatically.
Changing Room Temperature
Quickly
The Jet Mode function is available with Cooling,
1
Turn the appliance on.
2
Press MODE button repeatedly to select the
desired mode.
3
Press JET MODE button.
is displayed on the display screen.
NOTE
In Jet Cooling Mode, strong air blows out at
temperature of 18 °C for 30 minutes.
temperature of 30 °C for 30 minutes.
This function may operate differently from the
remote control display.
Description