FrontRow CM900 Installer's Manual page 21

Serial (COM) Commands
Syntax: #COMn[StringType, "Command"];
Name Required/Optional
n Required
String Type Optional
Command Required
Example (turns on a projector via COM 1 using an ASCII string command): #COM1[T1, "PWR ON\r"];
IR-Out Universal Commands
Syntax: #XROn[F2,"Command"];
Name Required/Optional
n Required
Command Required
Example (turns on a DVD player):
#XRO1[F2, " 40000300015430309DA03F508FC03A704D6039...3A704D803F808FC03A704D403A104FB03A704D903"];
Alarm Commands
Syntax: #ALM["Command", DTime];
Name Required/Optional
Command Required
Time Required
Data Type Format
Variant Use 1 for COM1; use 2 for COM2.
Variant Tn
where n is 1 or 2
Variant Specific to device.
Data Type Format
Variant Use 1 for IR port 1.
Variant Specific to device.
Data Type Format
Variant Use ON to start the alarm. Use OFF
to stop the alarm.
Variant Integer representing multiples of 4ms
duration.
18
Description
Denotes the COM port to be
used, corresponding to the
serial device to be controlled.
Defines the string type:
• ASCII string (1)
• Hexadecimal (2)
If you leave StringType blank,
a default of T1 is assumed
A string expression that
contains the command.
Description
Denotes the IR port to be
used.
A string expression that
contains the command.
Description
Starts/stops the beep.
Sets the duration.