LG 43UR64 Series Owner's Manual page 33

24 Fail Over Mode (Command: m i)
►Selects the Fail Over mode.
Transmission
(m)(i)( )([Set ID])( )([Data])(Cr)
[Data] 00 : Off
[Data] 01 : Auto
[Data] 02 : Manual
Ack
(i)( )([Set ID])( )(OK/NG)([Data])(x)
25 Fail Over Input Select (Command: m j)
►Selects an input source for fail over. (This feature is only available
when Fail Over is set to Custom.)
Transmission
(m)(j)( )([Set ID])( )([Data]1)( )([Data]2)( )([Data]3)( )([Data]4)...( )
([Data]N)(Cr)
[Data] 1-N (Input priority 1-N)
[Data] 20 : AV1
[Data] 21 : AV2
[Data] 22 : AV3
[Data] 90: HDMI1
[Data] 91: HDMI2
[Data] 92: HDMI3
[Data] 93: HDMI4
Ack
(j)( )([Set ID])( )(OK/NG)([Data]1)([Data]2)([Data]3)([Data]4)...([Data]
N)(x)
* Some input signals may not be available for all models.
* The data number (N) may vary depending on the model. (The data
number depends on the number of supported input signals.)
26 internal storage media contents play (Command: s n, a8)
►Plays media stored in the internal memory.
►This command may work differently depending on model and
signal.
Transmission
(s)(n)( )([Set ID])( )(a)(8)( )([Data])(Cr)
Data 01 : media contents play
Ack
(n)( )([Set ID])( )(OK/NG])(a)(8)( )([Data])(x)
33