Table of Contents

Advertisement

Quick Links

TC-96307-IP
Rev A, March 2022
commscope.com
Content
1
INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
Propel Panel Configurations Covered by This User Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2
Available Connection Components and Recommended Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3
Important Safety Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4
Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.5
Related Publications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1
General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2
Main Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.3
Specifications and Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.4
Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
2.5
QR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.1
Product QR code on Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
2.5.2
Component QR Codes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3
UNPACKING AND INSPECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4
OVERVIEW OF INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
5
INSTALLING THE PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.1
Determining Rack Size and Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.2
Installing Kits for Alternative Rack Sizes (Not 19-Inch) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.2.1
23-Inch Rack (584mm) Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.2.2
ETSI Rack Mount Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5.3
Panel Recess Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Electronic Only Document (EOD)
Propel Panel
Propel Panel (2RU Shown)
User
Manual
Page
Continued
© 2022 CommScope, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PPL-1U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CommScope PPL-1U

  • Page 1: Table Of Contents

    Panel Recess Options ............... . 16 Continued Electronic Only Document (EOD) © 2022 CommScope, Inc.
  • Page 2 CONTACT INFORMATION................34 Page 2 © 2022 CommScope. All Rights Reserved.
  • Page 3: Introduction

    TC-96307-IP INTRODUCTION The CommScope Propel Panel is a modular fiber connection platform that allows MPO modules, splice cassettes, and adapter packs of different sizes to be installed in any position in the panel where space is available. This user manual describes the Propel Panel and tells how to unpack the panel, mount it on a rack, and install connection components including MPO modules, splice cassettes, and adapter packs.
  • Page 4 PPL-DM-16AU-16LC-OM4-BEU 760252354 PPL-DM-16AU-16LC-OM5-BEU 16-fiber Adapter Packs 760252365 PPL-AP-16-LC-SM 760252366 PPL-AP-16-LC-OM4 9 per 1RU 760252367 PPL-AP-16-LC-OM5 760252804 PPL-AP-8-MPO16-ALL-B 18 per 1RU 760252806 PPL-AP-4-MPO16-ALL-B 12 per 1RU 760252805 PPL-AP-6-MPO16-ALL-B 6 per 1RU 760252803 PPL-AP-12-MPO16-ALL-B Page 4 © 2022 CommScope. All Rights Reserved.
  • Page 5: Important Safety Cautions

    Never look directly into an optical component that may have a laser coupled to it. Serious and permanent retinal damage is possible. If accidental exposure to laser radiation is suspected, consult a physician for an eye examination. Page 5 © 2022 CommScope. All Rights Reserved.
  • Page 6: Precautions

    • Care should be taken not to compromise the stability of the rack by installation of this equipment. 1.5 Related Publications The related publication listed is available by contacting the CommScope Support Center at https:// www.commscope.com/SupportCenter Publication Title...
  • Page 7: Product Description

    LC ports). Capacity per RU is 144 fibers (72 duplex LC ports). If SN connection components are used, the fiber capacity of the panel doubles in comparison to LC, because a single SN connector has 4 fibers, while LC has 2. Page 7 © 2022 CommScope. All Rights Reserved.
  • Page 8: Main Product Features

    • Cable Management Bracket—holds the rear cable management clips. Each clip holds one cable tied to it with tie wraps. • Cable Routing Platform—is a surface across which cables are routed from connection components out of the panel. Page 8 © 2022 CommScope. All Rights Reserved.
  • Page 9: Specifications And Dimensions

    CABLE MANAGEMENT ROUTING BRACKET 27509-A PLATFORM Figure 3. Propel Panel Rear View (2RU Shown) 2.3 Specifications and Dimensions Figure 4 shows dimensions for the three Propel panel sizes. Table 3 lists dimensions. Page 9 © 2022 CommScope. All Rights Reserved.
  • Page 10 18.55 in. (47.12 cm) Weight (Panel Only) 11.75 lbs. (5.32 kg) 17.60 lbs. (7.98 kg) 33.15 lbs. (15.03 kg) Weight (Packaged Panel) 15.95 lbs. (7.23 kg) 21.80 lbs. (9.88 kg) 38.95 lbs. 17.66 kg) Page 10 © 2022 CommScope. All Rights Reserved.
  • Page 11: Blades

    2 per blade/24 PPL-4U per panel per panel per panel per pane Each blade has 12 lanes Requires 2 lanes Requires 3 lanes Requires 4 lanes Requires 6 lanes Figure 5. Fully Loaded Blade Page 11 © 2022 CommScope. All Rights Reserved.
  • Page 12: Qr Codes

    Figure 7) that goes to the Propel Panels product page in the CommScope electronic catalog. The product page has documentation, including specifications, the Propel Panels Quick Start, and this user manual available for downloads. Other customer aides such as videos when available are placed on the product page.
  • Page 13: Component Qr Codes

    (for a module only) and test results. Refer to Figure 9 Figure ITEM SPECIFIC QR CODE ITEM SERIAL NUMBER MANUFACTURER COUNTRY AND DATE 27523-A CATALOG NUMBER PORT NUMBERS Figure 9. Example of Module Labeling Page 13 © 2022 CommScope. All Rights Reserved.
  • Page 14: Unpacking And Inspection

    Inspect the exterior of the shipping container(s) for evidence of rough handling that may have damaged the components in the container. Unpack each container while carefully checking the contents for damage. If damage is found or parts are missing, contact the CommScope Support Center using the URL: http://www.commscope.com/SupportCenter Save any damaged cartons for inspection by the carrier.
  • Page 15: Overview Of Installation

    For operational details for covers, doors, blades, connection components, cables, cable management clips, patch cords, and patch cords managers, refer to Section 6 on Page 22. Refer to these sub-sections during installation if any problem arises in moving through the installation procedures. Page 15 © 2022 CommScope. All Rights Reserved.
  • Page 16: Installing The Panel

    9-inch offset position for rear of rack mounting. The mounting brackets are stamped with the letter “1” at key locations to assist in Note: orienting the mounting brackets in the following procedures. Page 16 © 2022 CommScope. All Rights Reserved.
  • Page 17: Mounting Bracket Position On Panel As Shipped

    “1” and rotate the bracket 180 degrees. Reinstall 4 screws in holes marked “1”. 6.0 IN. (15.24 CM) 27538-A Figure 14. Rack Mounting Position for 6-Inch Recess Page 17 © 2022 CommScope. All Rights Reserved.
  • Page 18: Mounting Bracket In 9-Inch Offset Position (Rear Of Rack Mounting)

    Install the bottom two screws at the desired panel location. Set the panel into position on the screws just installed. Secure the panel to the rack by installing the remaining two mounting screws. Page 18 © 2022 CommScope. All Rights Reserved.
  • Page 19: Installing Connection Components

    Use the following procedure, referring to Figure Open the front cover of the panel. Determine where the connection component will be installed. It can be installed where there is enough space for it. Page 19 © 2022 CommScope. All Rights Reserved.
  • Page 20 Align grooves on bottom of connection component with rails on blade. Slide in on rails. GROOVE RAIL 27612-A Figure 18. Positioning Connection Component on Rails Slide in the connection component until it clicks into place. Page 20 © 2022 CommScope. All Rights Reserved.
  • Page 21: Installing Cables

    Route the patch cords neatly to both sides of the blade as shown in Figure 19. The number of patch cords routed to each side does not matter so long as the patch cords are neatly arranged. Page 21 © 2022 CommScope. All Rights Reserved.
  • Page 22: Operational Details

    1. Grasp the top corners of the door with thumb and forefingers as shown in Figure 20. Look for the tabs on the upper corners of the door, 2. Swing open the top of the door as shown in Figure Page 22 © 2022 CommScope. All Rights Reserved.
  • Page 23: Closing The Front Door

    To remove the rear cover of the Propel panel, loosen the two captive screens on the bottom corners of the cover, and lift off the cover. CAPTIVE SCREWS (2x) 27553-A Figure 21. Loosening the Captive Screws Page 23 © 2022 CommScope. All Rights Reserved.
  • Page 24: Re-Installing The Rear Cover On The 1Ru And 2Ru Panel

    Removing a Blade from the Panel To remove a blade from the panel: 1. Grasp the blade by the right handle and slide it out as shown in Figure 22 on Page Page 24 © 2022 CommScope. All Rights Reserved.
  • Page 25 3. Holding the cross bar stationary, push the handle toward the inside of the panel to release the blade from panel, and pull outward as shown in Figure 27547-A Figure 24. Sliding Out Blade from Panel. Page 25 © 2022 CommScope. All Rights Reserved.
  • Page 26: Installing A Blade

    Installing a Connection Component To install a connection component, position it on the blade rails wherever there is space for it. Slide the component in until it clicks into place. Refer to Figure 27 Figure Page 26 © 2022 CommScope. All Rights Reserved.
  • Page 27: Removing A Connection Component

    Slide in on rails. GROOVE RAIL 27612-A Figure 26. Positioning Connection Component on Rails Figure 27. Connection Components Can be Installed from Front or Rear 27552-A Figure 28. Installing a Connection Component Page 27 © 2022 CommScope. All Rights Reserved.
  • Page 28: Cables And Rear Cable Management Clips

    The snap-in cable mounting clip can accommodate single or multiple cables in a variety Note: of cable sizes. For more instructions and an illustration, refer to the installation drawing that came with the cable assembly. Page 28 © 2022 CommScope. All Rights Reserved.
  • Page 29: Installing A Cable And Clip Assembly Onto The Cable Management Bracket

    Figure 31 Figure 32 Start at forward most position and install additional cables working toward back of panel. Page 29 © 2022 CommScope. All Rights Reserved.
  • Page 30 Figure 32. Inserting and Sliding in a Cable and Clip Assembly Note: Detailed instructions for the cable management clip are provided with the cable assembly. CABLE MANAGEMENT BRACKET 27555-A Figure 33. Final Position of Cable and Clip Assembly in Cable Management Bracket Page 30 © 2022 CommScope. All Rights Reserved.
  • Page 31: Routing And Securing Cables On The Cable Management Platform

    6.6.1 Installing a Patch Cord Manager To install a patch cord manager: 1. Insert the patch cord manager into the notch on blade and rotate it upward as shown in Figure Page 31 © 2022 CommScope. All Rights Reserved.
  • Page 32: Removing A Patch Cord Manager

    2. Push down on back of the manager to snap it into place as shown in Figure INSERT PATCH CORD MANAGER INTO NOTCH ON BLADE, PUSH DOWN ON BACK OF MANAGER TO SNAP IN PLACE. 27544 Figure 36. Snapping Patch Cord Manager into Place Page 32 © 2022 CommScope. All Rights Reserved.
  • Page 33: Installing Patch Cords

    To install a patch cord, connect the connector to the selected front port of the connection module. Route patch cords neatly through patch cord managers as needed. Refer to Figure Figure 37. Patch Cords Fanned to Both Sides and Secured Within Patch Cord Managers Page 33 © 2022 CommScope. All Rights Reserved.
  • Page 34: Contact Information

    TC-96307-IP 7 CONTACT INFORMATION • To find out more about CommScope ® products, visit us on the web at www.commscope.com • For technical assistance, customer service, or to report any missing/damaged parts, visit us at http://www.commscope.com/SupportCenter Page 34 © 2022 CommScope. All Rights Reserved.

This manual is also suitable for:

Ppl-2uPpl-4u760252002760252003760252004

Table of Contents