Furuno DUAL GPS GP-150-DUAL Operator's Manual page 89

Setting DATA 4 to DGPS
An external DGPS receiver can be connected to the DATA 4 port.
Follow the procedure below to setup the GP-150-DUAL according to the
specifications of the DGPS receiver.
1) Press MENU ESC, 9 and 5.
2) Press
3) Press
4) Press the CU/NU ENT key.
5) Press
6) Press
7) Press
8) Press
9) Press
10) Press
11) Press
12) Press
13) Press
14) Press
15) Press the CU/NU ENT key.
16) Press the MENU ESC key.
to select Level.
or to select level; RS232C or RS422.
to select DGPS.
to select To Next Page.
DATA 4 I/O SETUP <DGPS>
To Previous Page
First Bit
Parity
Stop Bit
Baud Rate
: Select
ENT: Enter
I/O SETUP <DGPS> 2/2 menu
or to select First Bit.
or to select first bit; MSB or LSB.
to select Parity.
or to select parity bit; EVEN, ODD or NONE.
to select Stop Bit.
or to select stop bit; 1 or 2.
to select Baud Rate.
or to select baud rate; 4800 or 9600.
2/2
MSB LSB
EVEN ODD NONE
1 2
4800 9600
MENU: Escape
10. INSTALLATION
10-17