Loading The Racks - Indesit DSR 15B Operating Instructions Manual

Loading the racks

Tips
Before loading the racks, remove all food residues from the
preventive rinsing is needed under running water.
not tip over; and arrange the containers with the openings facing
thus allowing the water to reach every surface and flow freely.
the cutlery basket.
Since plastic dishes and non-stick frying pans usually retain more
water drops, their drying will be not so good as that of ceramic
or stainless-steel dishes.
Lightweight items such as plastic containers should be placed
in the upper rack and arranged so that they cannot move.
rotate freely.
Lower rack
The lower rack can hold pans, lids, dishes, salad bowls, cutlery
etc. Large plates and lids should ideally be placed at the sides.
Very soiled dishes and pans should be placed in the lower rack
because in this sector the water sprays are stronger and allow
a higher washing performance.
taking up less space.
In order to use it, just get hold of the coloured grip and pull it
upwards while rotating it forward. The supports can slide right
and left to fit the size of the crockery.
No
Several dishwasher models are
*
fitted with tip-up sectors .
They can be used in a vertical
position when arranging dishes
to load pans and salad bowls
easily.
Vertical Zone, special pull-out
*
supports in the rear of the rack
that can be used to support
frying pans and baking pans
in a more vertical position, thus
Cutlery basket
arrangement. The cutlery basket should be positioned only at
the front of the lower rack.
Upper rack
Load this rack with delicate and lightweight crockery such as
glasses, cups, saucers and shallow salad bowls.
Adjustable position tip-up compartments*
The side tip-up compartments can be positioned at three
different heights to optimize the arrangement of the crockery
inside the rack.
the tip-up compartments by inserting
the stem of each glass into the
corresponding slot.
For optimum drying results incline
the tip-up compartments more. To
change the inclination, pull up the
tip-up compartment, slide it slightly
and position it as you wish.
*
positions.
EN
11