INSTRUCTION MANUAL Thank you for your purchase. Please read this instruction manual carefully and use the product correctly. Before use, be sure to read “Using the Subwoofer Safely and Correctly”. Please keep this instruction manual together with the warranty in a place where it can be accessed at any time.
■Contents Using the Subwoofer Safely and Correctly...17 Precautions on Use ...20 Installing the Main Unit ...20 Names and Functions of Parts ...21 Example Connection ...25 Care and Specifications ...27 Warranty and After Service ...28 ■Accessories qSubwoofer x 1 wPower cable x 1 (For Japan and the USA) (For the UK) (For Germany)
● If you drop or break the subwoofer, turn off the power switch on the equipment itself (POWER), remove the plug from the power outlet, then contact Fujitsu Ten. Continuing to use the subwoofer in this condition may lead to fire or electric shock.
● Do not remove the plug from the power outlet by pulling on the cable. This can damage the cable, leading to fire or electric shock. ● Do not insert or remove the plug with wet hands. This can lead to electric shock. ●...
● If installing the subwoofer directly on flooring, first affix the feet provided as accessories. ● Before moving the subwoofer, first switch off the power supply to the connected device and disconnect the power supply cable, the connecting cables to each device, the speaker cables, and so on.
■Before turning the power on, and before switching inputs, always set the volume to minimum. A sudden large output could damage the connected speaker system. ■Depending on the location, your enjoyment of music could annoy other people. Please set the volume to a suitable level so as not to disturb the neighbors.
This is a switch for turning the L.P.F. adjustment function ON or OFF. Condition When the reproduction zone is adjusted at the TD725SW When the reproduction zone is adjusted at the player or amplifier ◆ Note that the examples given above apply in typical situations, but you can use the setting that you wish to.
!1 S peaker output terminals These terminals output, unchanged, the signals input to the speaker input terminals !0 . !2 A C IN terminal This terminal is connected to a household AC power outlet via the power cable provided as an accessory.
■Remote control Indicator panel on main unit Remote control photoreceptor !3 P OWER button Press this button to switch between the power ON and standby statuses. A POWER indicator is lit in blue when (The the power is ON and in red in the standby status.) !4 M UTE button Press this button to switch between the “mute”...
■Replacing the remote control’s battery Use two AAA size batteries (manganese batteries). qOpen the rear cover of the remote controller by sliding it in the direction shown while pressing on it. wPlace the two batteries in the battery compartment, following the indications in the compartment. eClose the battery compartment by sliding the rear cover in the direction shown while pressing on it.
Example Connection Example of a 5.1 channel system ■Player + AV amplifier + TD712z + TD725SW To DVD player etc. amplifier RCA cable (sold separately) ◆ Please purchase the cables marked “sold separately” at a retail store close to you.
Example of a 2.1 channel system ■Player + amplifier + TD725SW + TD712z ●Speaker cable connections SPEAKER TD725SW Speaker cable (sold separately) AV amplifier Speaker cable (sold separately) eTo power outlet Power cable - 26 - TD712z TD712z − ＋...
If this happens, turn the POWER button OFF. Upon turning the power back ON, check that operation is normal. If the fault remains, please contact Fujitsu Ten. ■Specifications Please note that the specifications and external appearance of the subwoofer are subject to change without notice for the sake of improvement.
Stop Using the Product. To prevent product failure or accidents, turn the power off, remove the power cable from the power outlet, and request an inspection without fail. For details about the charges for inspection and repairs, contact Fujitsu Ten. - 28 -...