Advertisement
Unit with Classic control panel
Open the Settings menu or Service menu.
The password for the Settings menu is 111.
Select Software Update using the left rotary knob
"SFL".
SFL
Image: SFL - software update
Press the "START STOP" button.
The left display shows "USb".
The middle display shows "SFL".
USb SFL
Image: USB stick with software update detected
The right display shows "no" when update is not
detected on the USB stick.
Check contents of USB stick. Both files must
be present.
Check USB stick.
www.hennypenny.com
Control pcb replacement instructions (Combisteamer)
USb SFL
Image: USB stick or software update not detected
Press the "START STOP" button for 3 seconds.
Update begins.
The middle display shows "---".
Image: Software update active - do not turn off unit
INFORMATION
The update can take up to 20 minutes. The
software is restarted several times. Do not switch
unit off.
Finally an automatic restart of the software occurs.
Assembly instructions
no
---
5
Advertisement
