Advertisement
Control pcb replacement instructions (Combisteamer)
Tap the "OK" field
The software restarts automatically
INFORMATION
After the update, a blue screen may appear and the
software does not start. In this case, switch the unit
off and then back on. In rare cases, this may
happen again.
Restoring data
1. Open the Service menu as described.
2. Tap the "Restore data" field.
3. Touch the Confirmation field.
Restore data from the SD card.
A confirmation then appears on the
touchscreen.
4. Tap the "OK" field.
OEM settings
Loading settings
INFORMATION
An OEM configuration may be required on units of
key accounts.
4
Open the Settings menu as described.
Wipe to select the page with the "Load OEM
settings" field in the left menu area.
Tap the "Load OEM settings" field.
Enter the OEM code and tap the Confirm field.
The data is loaded.
The software restarts automatically.
Assembly instructions
www.hennypenny.com
Advertisement
