DIRECTION OF USE This air purifier is operated by a touch screen system and a remote control. Touch screen system can be activated using fingers to touch the control panel. Remote control, point the remote signal transmitter to the signal receiver on the control panel. Avoid having obstructions between the remote signal transmitter and the receiver.
HOW TO CHANGE THE FILTER Turn off and unplug the air purifier before changing the filter. To change the filter, pull the buttons on either side of the front cover towards yourself to unlock it, and then remove the front cover Push the buttons on either side of the pre-filter towards each other as indicated by the arrows to unlock it.
CARE AND CLEANING INSTRUCTIONS Use a damp cloth to wipe stains, and then dry the area by wiping. When cleaning, be careful not to let the wire, switch, motor, and other electrical components get wet. Do not use chemical products, thinner solvents, alcohol, kerosene or petrol to clean the air purifier. The pre-filter can be washed using water or soap water, and should be cleaned every 1-2 months.
Need help?
Do you have a question about the AP12R1 and is the answer not in the manual?
Questions and answers