DIRECTION OF USE This air purifier is operated by touch screen system and remote control. Touch screen system can be activated using fingers to touch the control and display panel. When the machine is left idle for 30 seconds, the operating lights will dim but the air purifier will still be operating as normal.
HOW TO CHANGE THE FILTER To change the filter, pull the buttons on either side of the front cover towards yourself to unlock it, and then remove the front cover. Push the buttons on either side of the pre-filter towards each other as indicated by the arrows to unlock it, and then remove the pre-filter.
CARE AND CLEANING INSTRUCTIONS Use a damp cloth to wipe stains, and then dry the area by wiping. When cleaning the fan, be careful not to let the wire, switch, motor and other electrical components get wet. Do not use chemical products, thinner solvents, alcohol, kerosene or petrol to clean the air purifier. The pre-filter can be washed using water or soap water, and should be cleaned every 1-2 months.
Need help?
Do you have a question about the HT-AP12 and is the answer not in the manual?
Questions and answers