First Steps - Frigidaire Beverage Center Refrigerator Use & Care Manual

• If voltage varies by 10% or more, performance of your
beverage cooler may be affected. Operating beverage
cooler with insufficient
compressor.
• To prevent the beverage cooler from being turned off
accidentally, do not plug unit into an outlet controlled by
a wall switch or pull cord. It is recommended that a
separate circuit serving only your beverage cooler be
provided.
• Do not pinch, knot, or bend the cord in any manner.
• DO NOT use this appliance outside. It is designed for
indoor use only.
• NEVER unplug the beverage cooler by pulling on the
cord. Always grip the plug firmly, and pull straight out
from the receptacle.
• To avoid electrical shock, unplug the beverage cooler
before cleaning.
N OTE: Turning the temperature control to "OFF" turns off
th e compressor, but does not disconnect the power to other
e lectrical components.
CO CANISTER SAFE HANDLING
2
• CO
canisters must be handled with extreme care. They
2
contain potentially hazardous high pressure compressed
gas.
• ALWAYS connect CO
regulator.
• NEVER drop or throw the CO
• NEVER connect gas canister directly to keg.
• ALWAYS keep CO
canisters in a cool place (70º or
2
less) and away from heat.
• In case of CO
leakage, ventilate and evacuate the area
2
immediately.
• ALWAYS keep canister secured in an upright position.
• Check the Department of Transportation (D.O.T.) test
date on the canister neck and do not use if older than 5
years.
• Return outdated canister to your gas supplier for one that
is within the time window.
power can damage
gas canisters to a pressure
2
canister.
2
the This Use and Care Manual provides specific assembly,
o perating and maintenance instructions for your model. Use
t he beverage cooler only as instructed in this Use and Care
M anual. Before starting the beverage cooler, follow these
i mportant first steps.
PARTS AND ACCESSORIES
Your beverage cooler comes with a box that contains all the
p arts and accessories needed for your beverage cooler.
C heck to make sure that you have received the box
c ontaining all of the components listed below. You will need
t he following tools to assemble the beverage cooler.
SCREWDRIVER
ADJUSTABLE
DRIP TRAY AND MOUNTING HARDWARE BOX
(1) Drip Tray
( 2) Drip Tray Cover
( 3) Drip Tray Bracket
(4) CO Canister Bracket
2
(5) Mounting Screw s
( 6) 4" Long Carriage Bolt
( 7) Wing Nut
(8) Hose Routing Clips
(1) DRIP TRAY
(5) MOUNTING
SCREW CARRIAGE BOLT
3
PHILLIPS™ SOCKET
WRENCH
PLIERS
WRENCH
(3) DRIP TRAY
(2) DRIP TRAY
BRACKET
COVER
(6) 4" LONG (7) WING NUT
1 piece
1 piece
1 piece
1 piece
6 pieces
1 piece
1 piece
2 pieces
(4) CO CANISTER
2
BRACKET
(8) HOSE
ROUTING CLIP