Installation Location - Thermador T24UR925DS Installation Manual

Installation location

A dry, well ventilated room is suitable as an installation location. The installation location should not be
exposed to direct sunlight and not placed near a heat source, e.g. a cooker, radiator, etc.
If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following
minimum distance from the heat source:
▪
To electric or gas oven/range 1¼" (3 cm).
▪
To an oil or coal-fired cooker 11
▪
To another Refrigerator or Wine Reserve 1" (2.54cm).
The floor of the installation location must not give way; if necessary, reinforce floor. The appliance must
be upright and level to function correctly.
For proper operation and appearance of the unit, the cabinet opening should be square and have
dimensions as shown in the next diagrams.
Page | 6
" (30cm).
13
/
16