Installing The Overlay Panel - Thermador T24UR925DS Installation Manual

Double drawer refrigerator
Hide thumbs Also See for T24UR925DS:
Table of Contents

Advertisement

Available languages

Available languages

Installing the overlay panel

(For T24UR905DP models only)
If you plan to install a custom overlay panel, you will need to create the panel yourself or consult a
qualified cabinetmaker or carpenter.
A full sized template for easier marking the hole pattern is included in the manual package.
IMPORTANT:
- The thickness of both the overlay panels must be ¾" (19mm).
- Overlay panel must not weigh more than 10lbs (4.54kg) each.
- Overlay panels weighing more than recommended may cause damage to your appliance.
- It is recommended to have the help of a second person to install the panel.
- Use the recommended tools in the installation manual to facilitate the installation of the panel. Failure to
use the recommended tools or the help of a second person may result in damage to panel and/or the
appliance.
- To install the panel, use only the screws included in the "Installation Kit".
Create the custom overlay panel using the dimensions shown.
Top Panel:
Page | 15

Advertisement

Table of Contents
loading

This manual is also suitable for:

T24ur915dsT24ur905dp

Table of Contents