Page 2
Your Tao Motor is here due to experience of years, skilled and careful staff, advanced and updated engineers. We are expectant that you will enjoy the product and we’ll have a good feedback from you people.
● Coverage of electrical closings should be ensured. ● The diameter and width of wheel shouldn’t be less than 35mm/ 350mm. ● The person driving and riding should wear helmets. ● Operator must be of 16 years. ● Motor should not be modified in such a way that it allows the exceed of a power output greater than 500W and speed greater than 32km/h.
Page 4
APPLYING OF BREAKS: Applying breaks to e-bike is same as that of normal bike. To apply breaks easily, place your fingers over the brake levers and palm and thumb under the handle grips and for quick stop squeeze your hands and you’ll be able to control your e-bike. That’s the actual way to control an electronic bike.
Page 5
CAUTIONING: Some steps should be kept in mind on the activation of accelerator. After settling on the bicycle, turn on the accelerator Otherwise bike will outbreak and injure you as well as can cause severe damage to bike too. CEASING: E-bike contains two sets of brakes placed at the front and at the rear.
LIGHTS: Another main feature has been set to make you travel in the night, dark areas or in crowded traffic and it is headlight and taillight. These lights consume some electricity. The switch of these light is located on the right handler. If you keep them on, you can travel at one charge about 5%.
USING THE REAR STORAGE COMPARTMENT: On the purchase of bike you are provided with a key of a compartment that is being used to store important things that are relevant to your bike i.e charger( to charge your battery), associated cables, a locking mechanism i.e u-lock (security for parking). To close the compartment turn the key in the left direction and to open it turn iit in the right direction.
Page 8
DISCONNECTING THE CIRCUIT BREAKER: When the circuit breaker is detached, power being supplied from your battery to e-bike will get blocked. Some steps are needed to disable the circuit breaker. ● Open the seat compartment. ● Find out the circuit breaker switch. ●...
If you have to cover long distances and at the same time want to save electricity than you must have to follow these driving habits. ● When you are going downhill or moving on a flat road surfaces try your best to use bikes’...
Care of battery should be done otherwise you have to replace it before the expected period of time. FOLLOW THESE STEPS TO MAINTAIN THE EFFICIENCY OF BATTERY: ● After your ride, charge it soon. ● Fully Charge your battery as it maintains the battery’s lifespan. And avoid keeping your battery in the storage box with half charged.
CONTROLLER: Controller has so many advantages as it performs many functions. Tao Motor e- Controller is placed under the seat. It’s function is to allow steeples speed reduction, discontinue the motor on activation of brakes, regulates the speed and electronic functions of e-bike.
Pedals are connected to rear wheel. Pedals shouldn’t be removed. SHOCK ABSORBERS: Your e-bike is armed with TAO MOTOR SHOCK SYSTEM SHOCK ABSORBERS. This is a simple device but much effective. Their main function is to absorb energy when slamming and drenching and gives you comfortable ride.
Page 13
TAO MOTOR E-BIKE TROUBLESHOOTING: We have added this section to make you people aware of the problem and solutions too. But these ebikes have some section that a rider can’t repair it and you have to take it to professional or Motor dealers but if warranty is available.
Page 14
You can try it by own if you are familiar with mechanical parts of rear motor Otherwise it can cause serious problems. THE CHAIN: Lubrication and oiling of chain is compulsory for effective functioning. THE PRESSURE: Maintenance of pressure in tires is compulsory for balance and effective performance of e- bike.
Motor is quite sensitive and complex part of e-bike and servicing of motor requires high skill and expertise So repairing it by own is risky without having any expertise. In order to repair it bring it to your near TAO MOTOR DEALER. And it’s maintenance should be done after every 100 hours...