BRAHMA EUROFLAT Series Manual

EUROFLAT SERIES
TYPES MT11 MT31
AUTOMATIC GAS BURNER CONTROL
SYSTEMS FOR GAS BURNERS AND GAS
BURNING APPLIANCES WITH OR
WITHOUT FAN MONOELECTRODE WITH
EXTERNAL IGNITION DEVICE.
3999_r01

Application

This range of electronic gas burner control systems has
been designed specifically for atmospheric and fan assisted
burners for intermittent operation (systems for non-
permanent operation).
These types of automatic burner control units differ from the
standard model essentially in the operating cycle and in the
features of the ignition-detection device. Due to the design
and the technical-structural characteristics, the controls of
this series can be used in general in gas firing installations
with atmospheric burner.

Features

Table 1 shows the main features of this series. Other
important features are:
− in accordance with EN298 (European standard for
automatic gas burner control systems);
− flame monitoring by the rectification property of the
flame: ionization;
− electrical
service life
Operations;
− two independent safety contacts in series on the gas
valve output;
− electronic ignition device (transformer TC1 – TD1
series).
T AB L E 1 B UR NE R
MT 11 *
MT 31 *
at max. loading >250.000
* AMCLXN
* FMCLXN
1/4