Function Description - Holtek BA45F56 Series Function Description

Function Description

Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
Name
Function
Input
Output
AN0571EN V1.00
BA45F56xx Wireless Transceiver Application
RF initialisation, FSK data rate is 50kbps, power is 10dBm, after the program has
completed, the RF will enter the Sleep Mode
--
--
After the program has executed, the RF will enter the RX Mode
--
--
has executed
After the program
RX mode to receive for 9.5ms after every 4s wake-up. During program execution, if the
Preamble signal is detected, the RX receiving time will be extended to the end of the packet
reception (up to 250ms) and will then enter the Light Sleep Mode after completing data
reception. If the Preamble is not detected, return to the IDLE Mode and wait for the next
wake-up action
--
--
After the program has executed, the RF will enter the TX Mode and transmit the data in the
mRFBuf. After transmitting, the RF will enter the Light Sleep Mode
RF data = mRFBuf[0:18]
--
After the program has executed, the RF data will be read from FIFO and stored in the
mRFBuf variable
RF data = mRFBuf[0:18]
--
After the program has executed, the IRQ Flag is read into mRFRdDta and the IRQ is cleared
--
IRQ Flag = mRFRdDta
After the program has executed, the current RF state data will be transmit to the ACC, thus
determining the current RF mode.
--
Option Mode = ACC
After the program has executed, the RF will enter the Deep Sleep Mode
--
--
After the program has executed, the RF will enter the Idle Mode
--
--
After the program has executed, the RF will enter the Light Sleep Mode
--
--
9 / 14
RF_Init
RF_EntryRxMode
RF_EntrySniffMode
, the RF will enter the WOR Mode and automatically enter
RF_SendData
RF_ReadRxData
RFGetClrRFIrq
RF_GetOpMode
RFSleepMode
RFIdleMode
RFLightSleepMode
November 5, 2020