1.3.1 Solar panel: connect panel to camera, fix a suitable angle with screws 1.3.2 Sim card (For IPCAMPTZSOLAR4G) and TF card: loosening the cap in the above remark 1.3.3 Insert sim card (For IPCAMPTZSOLAR4G) and TF card, then tighten the screws.
3. APP Installation 3.1 Scan the following QR codes or search for “UBOX” from the App Store (for iOS devices) or Google Play Store (for Android Smartphone) to download and install the app. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 5
“Register” to next step (For your password safety, the password requires more than 8 characters plus a combination of letters) 3.2.4 Enter your e-mail address, and input your login password. Then press “Login” www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 6
This device will reboot and enter the pairing state. 4.8 The app will input the Wi-Fi name automatically, please input the correct Wi-Fi Password. Then you can choose the “QR code configuration” or “Sound wave configuration” www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 7
QR code. Use the device to scan the QR code 10cm away from the mobile phone. 4.11 Select the family name or device location then press “Done” 4.12 The device will enter to the device list automatically. Setup success! The device is ready to use. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 10
Stick the position paper on the wall where you want to install the camera. Drill the 4 holes according to the 4 dots on the paper and then fix the bracket using the expansion screws. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 11
We suggest installing the camera about 9ft. You may adjust the camera angle physically according to the live view in your mobile. To focus your motion area to get the more accurate motion trigger events www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 12
Quick guide in adding Elinz IPCAMPTZSOLAR4G to Ubox App (IPCAMPTZ 4G Version) • Make sure to test your Sim card if it’s working on your mobile phone and has data credit before inserting it in the camera. • If you have only just activated your Sim card it may take up to 24 hours to work depending on your carrier.
Page 13
4. Scan the QR Code on the camera. 5. Wait for few seconds to connect. 6. Name the device, then click “Next” www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Page 14
6. You will get a prompt that camera has been installed successfully www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
This device provides one month of free cloud storage services. If you need to continue using value-added services after the trial period expires, you need to purchase them in the app. www.elinz.com.au / sales@elinz.com.au / 1300 881 773...
Need help?
Do you have a question about the IPCAMPTZSOLAR4G and is the answer not in the manual?
Questions and answers