Advertisement
Model:GHT08
Application range
The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other
use of the trimmer, not included in this manual, could damage the trimmer or seriously
injure the operator.
Before starting the machine
Connection
This hedge trimmer may only be connected to single-phase AC current. Ensure that the
mains voltage is the same as the operating voltage indicated on the rating plate.
Connect the power plug to the coupling of an appropriate extension cord. Form a loop,
push it through the opening in the handle and hook over the cord hook
Starting the machine
Switching on / off
Switching on:
Please insert the power plug completely into the
socket,press the safety
switch of the front handle and the trigger of the handle with both hands at the same
time.
Switching off: Release one of the safety switch or
trigger,the tool will be stopped.
The blade brake makes the blades stop immediately within 0.5 s, the small flash in the
area of the upper ventilation slots is normal and dose not harm to you or the machine.
If you don't need to use the machine ,you'd better unplug the power plug and store the
machine with the supplied safety blade cover.
7
Advertisement
