Related Manuals for GARCARE GHT06
Summary of Contents for GARCARE GHT06
- Page 1 Corded Hedge Trimmer Model:GHT06 Model:GHT12 Model:GHT08 Please read this instruction manual carefully before using the tool !
- Page 2 Explain the symbol Class II tools symbol – To reduce the risk of injury, user must read instruction manual WARNING Remove plug from the mains immediately if cable is damaged or cut. Do not expose to rain Danger of electric shock General Power tool Safety Warnings WARNING Read all safety warnings and all instructions.
- Page 3 the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
- Page 4 caused by poorly maintained power tools. f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
- Page 5 Specification Model Rated Rating Cutting length Cutting capability (inch) (inch) GHT06 120V~60Hz 4.2A GHT12 120V~60Hz 4.6A GHT08 120V~60Hz 4.8A Wear hearing and eye protection while operating the power tool. The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another.
- Page 6 Parts Description Model :GHT06 Model :GHT12...
- Page 7 Model:GHT08 Application range The hedge trimmer should only be used for trimming hedges, bushes and shrubs. Other use of the trimmer, not included in this manual, could damage the trimmer or seriously injure the operator. Before starting the machine Connection This hedge trimmer may only be connected to single-phase AC current.
- Page 8 Adjusting the position of handle, This function just for model GHT08 Press the rotary button on the model GHT08(do not press the trigger ) then rotate the handle around the main part of the tool, the handle could be adjusted to different position(-90°...
- Page 9 201610 SAVE THIS INSTRUCTION MANUAL AS LONG AS YOU CAN ! Customer Service mail:garcareservice@gmail.com...