Disposal Of Packaging Materials; Energy Saving Tips - Hotpoint HCIH50TI1WUK User Manual

petroleum products on plastic
parts, interior and door liners or
gaskets. Do not use paper towels,
scouring pads, or other harsh
cleaning tools.
DISPOSAL OF PACKAGING
MATERIALS
The packaging material is 100% recyclable and is
marked with the recycle symbol
parts of the packaging must therefore be
disposed of responsibly and in full compliance
with local authority regulations governing
waste disposal.
DISPOSAL OF HOUSEHOLD
APPLIANCES
This appliance is manufactured with recyclable
or reusable materials.
Dispose of it in accordance with local waste
disposal regulations.
For further information on the treatment,
recovery and recycling of household electrical
appliances, contact your local authority, the
collection service for household waste or the
store where you purchased the appliance.
This appliance is marked in compliance with
European Directive 2012/19/EU, Waste Electrical
and Electronic Equipment (WEEE) and with
the Waste Electrical and Electronic Equipment
regulations 2013 (as amended). By ensuring
this product is disposed of correctly, you will
help prevent negative consequences for the
environment and human health.
The symbol on the product or on the
accompanying documentation indicates that
it should not be treated as domestic waste but
must be taken to an appropriate collection
center for the recycling of electrical and
electronic equipment.

ENERGY SAVING TIPS

To guarantee adequate ventilation follow
installation instructions.
Insufficient ventilation at the back of the
product increases energy consumption and
decreases cooling efficiency.
Frequent door opening might cause an increase
in Energy Consumption.
The internal temperature of the appliance and
the Energy Consumption may be affected also
by the ambient temperature, as well as location
. The various
of the appliance. Temperature setting should
take into consideration these factors. Reduce
door opening to minimum.
When thawing frozen food, place it in the
refrigerator. The low temperature of the frozen
products cools the food in the refrigerator.
Allow warm food and drinks to cool down
before placing in the appliance.
Positioning of the shelves in the refrigerator has
no impact on the efficient usage of energy. Food
should be placed on the shelves in such way to
ensure proper air circulation (food should not
touch each other and distance between food
and rear wall should be kept).
You can increase storage capacity of frozen
food by removing baskets and, if present, Stop
Frost shelf.
Do not worry about noises coming from the
compressor which are normal operation noises.
This product contains a light source of energy
efficiency class F.
EN - 9