Troubshooting - G.I.KRAFT GI35112 Owner's Manual

2 、 Troubleshooting
Trouble
No input power
Timer does not work
Not enough electricity
power of charged Batt-
ery
Charger stops working
while operating
Voltmeter does not
work
Ammeter does not work
Cannot charging battery
Probable cause
(1)incorrect input power
connection
(2)Power switch in"off"
position
（ 1 ） Charging time has not adjusted
（ 2 ） Timer damaged
(1)Improperly connect work cables
or clamps
(2) Not enough charging current
(3) Not enough charging time
(4) Ex cess charge rate of battery capacity
(1)Timer reaches preset time
(2)Charger over heat
(1)Switches in "off"
position
(2)12V/24Vswitch in
neutral
(1)No out put current
(1)Incorrect cables connec-
tions
(2)Switches in "off"position
(3)Battery had been damaged
Remedy
（ 1 ） Check input power connection
（ 2 ） Turn power switch to "on"
position
（ 1 ） Adjust charging time
（ 2 ） Replace timer
(1)Check cables connections
and tighten clamps
(2)increase charging current
(3)increase charging time
(4)Check correct charge rate
for the battery being charged
(1)Adjust timer
(2)Wait for charger temper-
ature cool down
(1)Turn on power,adjust timer
and current
(2)Select 12Vor24V
(1)Ammeter works while
under loading only
(1)Check cables connections
(2)Adjust switches to correct
position
(3)Check battery
P age.9