Table of Contents
Advertisement
2.4 Antenna Installation
The MLBase comes with connectors for two antennas.
• The 900 MHz omnidirectional antenna is used to communicate with the MLRemote network.
• The wideband 2.4 GHz Yagi antenna is used to provide a connection to the Wi-Fi network the server is on.
The MLBase module has both an integrated Radio and Wi-Fi connection. Additionally, an Ethernet cable can be
used for sites where a dedicated networks are available.
This section outlines installation instructions for both antennas.
Omnidirectional Antenna
The L-com 900 MHz 6 dBi Omnidirectional Antenna includes a right-angle bracket for side of pole mounting.
The antenna kit includes cables to connect the antenna to the bottom of the MLBase enclosure. The connector on
the antenna is Type-N female.
The antenna's attached mount bracket is secured to the side of pole using the included U-bolts.
Connect one end of the provided cable to the antenna and the other to the connector labeled Antenna on the
bottom of the MLBase station. See section 1.3 Connections of this guide for reference.
18
Section 2 - MLBase Installation
MLBase User's Guide
Advertisement
Table of Contents
