Setting-Up The Projector; Room Light - Fisher PLC-XF10N Owner's Manual

Sanyo fisher co. owner's manual multimedia projector plc-xf10n, plc-xf10nl (without lens)
Table of Contents

Advertisement

POSITIONING:
THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG
THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE
HAZARD.

ROOM LIGHT

The projector should be placed in a room with
limited light. Picture quality will be directly
affected by lightning conditions.
Max. Zoom
Screen
Size
Min. Zoom
Distance
Picture tilt and projection angle can be adjusted by twisting
ADJUSTABLE FEET. Projection angle can be adjusted up
to 4 degrees by rotating Adjustable Feet.
This projector is basically designed to project on a flat projection surface.
This projector can be focused from 4.9' (1.5 m) ~ 80.7' (24.6 m).
Refer to the figure below as an example when positioning the projector to the screen.
40"
40"
100"
77"
4.9' (1.5 m)
13.1' (4.0 m)
Maximum Zoom
Minimum Zoom
300"
200"
150"
100"
231"
154"
77" 115"
DISTANCE
150"
200"
115"
154"
20' (6.1 m)
26.9' (8.2 m)
MOVE THE PROJECTED IMAGE POSITION
Adjust the projected image position (maximum 760mm
downward or upward on the 100" screen) by using lens shift
function. (See page 33.)
400"
462"
308"
400"
300"
308"
231"
53.8' (16.4 m)
40' (12.2 m)
100"
SCREEN
600"
600"
462"
80.7' (24.6 m)
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plc-xf10nl

Table of Contents