Advertisement
ELECTRICAL CONNECTIONS
PRECAUTIONS on power supply and speaker connections:
• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the unit will be seriously damaged.
• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in your car.
A
Typical connections
Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.
1
Connect the colored leads of the power cord in the order specified in the illustration below.
2
Connect the antenna cord.
3
Finally connect the wiring harness to the unit.
Antenna terminal
To external components (see diagram
White with black stripe
White
Left speaker (front)
*
1
Not supplied for this unit.
*
2
Before checking the operation of this unit prior to installation, this lead must be connected, otherwise power cannot be turned on.
To subwoofer (see diagram
15 A fuse
Line out (see diagram
Black
)
*
2
Yellow
Red
Blue
Blue with white stripe
Orange with white stripe
Brown
Gray with black stripe
Gray
Right speaker (front)
)
)
To metallic body or chassis of the car
To a live terminal in the fuse block connecting to the car battery (bypassing
the ignition switch) (constant 12 V)
To an accessory terminal in the fuse block
To the automatic antenna if any (250 mA max.)
To the remote lead of other equipment (200 mA max.)
To car light control switch
To cellular phone system
Green with black stripe
Green
Left speaker (rear)
3
Ignition switch
Fuse block
Purple with black stripe
Purple
Right speaker (rear)
Advertisement
