Fisher VPC-C4GX Instruction Manual page 15

DANGER
k Cautions when plugging in
i Securely plug the power cord all the way into the
power outlet. If the docking station or AC adaptor/
charger is used with the power cord not fully plugged
in, heat may be generated and cause a fire.
i Do not use if the power cord is damaged or cannot be
correctly plugged into the power outlet. Using in this
condition may cause a fire or electric shock.
i Do not allow dust, etc., to build up on the power cord
or power outlet. A build-up of dust may cause a short
circuit or generate heat and cause a fire.
i When unplugging the power cord, be sure to hold the
plug part and slowly pull it out of the power outlet.
Pulling the cord portion may damage the power cord
and cause a fire or electric shock.
k Do not pull on the power cord to unplug it
i Do not leave the power cord plugged into the power
outlet while the other end is not plugged into the
docking station or AC adaptor/charger. The loose end
can cause electrocution if touched with wet hands or if
handled by children.
i Use only the supplied power cord. If a different power
cord is used, it may be rated for a different current
load, and that may cause a fire.
i The supplied power cord is for exclusive use with the
devices supplied with your camera. Do not use it with
other devices, as doing so may cause a fire or electric
shock.
i Do not use a bundled power cord, as the heat
generated may cause a fire.
i When using an extension cord, make sure that the
total wattage of the connected devices does not
exceed the rated value of the extension cord. If the
power load exceeds the rated value, it may cause a
fire.
12
English