1. Manuals
  2. Brands
  3. NTP Technology Manuals
  4. I/O Systems
  5. DX32R
  6. Installation manual

NTP Technology DX32R Installation Manual

Digital i/o and router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DX32R Digital I/O and Router
Contents
Doc no. DX32R-8001-A-4
Installation Guide
Rev. date 201203
4
5
7
8
8
10
10
10
Page 1 of 10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DX32R and is the answer not in the manual?

Questions and answers

Related Manuals for NTP Technology DX32R

Summary of Contents for NTP Technology DX32R

  • Page 1: Table Of Contents

    Installation Guide DX32R Digital I/O and Router Contents GENERAL DESCRIPTION. Operation Rear panel layout. Dual SFP optical I/O mini-module Terminal Connections. ELECTRICAL SPECIFICATIONS. MECHANICAL DIMENSIONS: ENVIRONMENT SPECIFICATIONS. Doc no. DX32R-8001-A-4 Rev. date 201203 Page 1 of 10...
  • Page 2 User guide DX32R IMPORTANT SAFETY INSTRUCTIONS READ AND KEEP THESE INSTRUCTIONS WARNING – when using electric products, basic precautions should be followed, including the following: Read all of the safety and installations instructions and explanation of graphic symbols before using the product.
  • Page 3 User guide DX32R The product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a power supply cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.

  • Page 4: General Description

    General description. The DX32R Digital I/O is a 19” wide, 1RU high digital patch bay and interface unit for Digital Audio signals compliant to the formats: AES3, MADI (AES10) and IP audio based on Dante™. DX32R has a total of 8 AES3 I/O (16 mono) channels, two MADI BNC connectors for 64 channels of I/O, and optionally two SFP modules for either optical or coax MADI connections providing a total of 192 I/O channels on MADI.

  • Page 5: Operation

    The “reconfig” button is accessed via a hole in the rear panel using a pen or a similar pointed item. Trough the hole a green LED is visible, which will light up indicating the various reconfig modes of the DX32R as a result of the activation of the “reconfig”...
  • Page 6 For description of the Penta manager software please refer to the software user guide. Note that when the DX32R is a part of an NTP router system, all management of the unit is handled by the control system. Below is a screen dump of the basic/opening control window of the Penta manager software.

  • Page 7: Rear Panel Layout

    User guide DX32R Rear panel layout. Figure 1 Rear panel layout (Figure 1). Mains inlet 1. Mains inlet 2. 4 x AES/EBU input and output. 25 pole D-sub female connector with TASCAM pin-out. 4 x AES/EBU input and output. 25 pole D-sub female connector with TASCAM pin-out.

  • Page 8: Dual Sfp Optical I/O Mini-Module

    User guide DX32R Dual SFP optical I/O mini-module The Dual SFP optical module, can be installed with one or two “Small form-factor pluggable” (SFP) transceiver modules. The SFP modules are standard types which support various types of optical interfaces with LED or Laser diodes and various wave lengths.
  • Page 9 User guide DX32R Connections channel 1-4 i.e. channel 5-8 Pin no Func. Pin no Func. DOUT 4/8 + DOUT 4/8 - DOUT 3/7 + DOUT 3/7 - DOUT 2/6 + DOUT 2/6 - DOUT 1/5 + DOUT 1/5 - DIN 4/8 +...

  • Page 10: Electrical Specifications

    User guide DX32R Electrical specifications. Power consumption ............15 VA max. Input voltage ..............90 – 260 VAC 100 – 240 VAC Nominal, 47 - 63 Hz Mains fuse, mounted in IEC connector ......1 A, T1AH/250V Safety compliance ............EN 60950-1:2006 Power supply cord must be min.

Table of Contents