Declaration Of Conformity - CHESTER GT95002 Manual

DISPOSAL︓
Do not dispose of electric power tools with domestic refuse.
The electric power tool is
reduce transport damage.
This packaging is a raw material and as such can either
be reused or can be fed back into the raw material cycle.
The electric power tool and its accessories are made from
various materials such as metals and plastics. Take defective
components to a special refuse collection point. Ask about
these at your specialist shop or local council.

DECLARATION OF CONFORMITY :

Product :
Trade mark :
Model :
Person authorized to draft the technical documentation :
ISO RENOV SPRL
Rue des Erables 6
B-7140 Morlanwelz (Mariemont)
Belgium
Declares that the product described is in conformity with the essential requirements of the below mentioned
directives. References to the relevant harmonized standards used, or to the specifications in relation to which
conformity is declared, are listed below the relative directive.
European Directives (including, if applicable, their amendments up to the date of signatures);
2014/35/EU(LVD)
2014/30/EU EMC
2011/65/EU RoHS
European harmonized standards (including, if applicable, their amendments up to the date of signature);
EN 60335-1:2012/+A11:2014
EN 60335-2-45/A11:2012
EN 62233:2008
EN 55014-1:2006/+A2:2011
EN 55014-2:2015
EN 61000-3-2:2014
EN 61000-3-3:2013
The undersigned acts on behalf of the company CEO, Mr. Adam Kowalski
Date: 14/01/2019
Signature:
Multifunctional Electric Weed Burner
Chester
GT95002 (VERT00028)
www.chestergarden.be
shipped in packaging to
GB
15