Download Print this page

Bosch Professional GTC 400 C Original Instructions Manual page 14

Hide thumbs Also See for Professional GTC 400 C:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
14 | English
Glossary of terms
To find out more, visit: www.bosch-professional.com.
Infrared thermal radiation
Infrared thermal radiation is electromagnetic radiation emit-
ted by every body above 0 Kelvin (−273 °C). The amount of
radiation depends on the temperature and the emissivity of
the body.
Emissivity
The emissivity of an object depends on the material and the
structure of its surface. This specifies how much infrared
thermal radiation the object emits compared with an ideal
radiant warmer (black body, emissivity ε = 1) and accord-
ingly has a value between 0 and 1.
Thermal bridge
A thermal bridge is defined as a position on the external wall
of a building, where there is a localised increase in heat loss
due to a structural defect.
Thermal bridges can lead to an increased risk of mould.
Reflected Temperature/Reflectivity of an Object
The reflected temperature is the thermal radiation that is not
emitted by the object itself. Depending on the structure and
material, background radiation is reflected in the object to
be measured, therefore distorting the actual temperature
result.
Distance from the Object
The distance between the object being measured and the
measuring tool influences the captured area size per pixel.
You can capture increasingly large objects as the distance
from the object becomes greater.
Distance (m)
Size of infrared
pixels (mm)
0.5
3
1
6
2
12
5
30
Maintenance and Service
Maintenance and Cleaning
Only store and transport the measuring tool in a suitable
container, such as the original packaging. Do not affix any
stickers near to the sensor on the measuring tool.
Keep the measuring tool clean at all times. A dirty infrared
sensor (16) may impair the measuring accuracy.
When cleaning the measuring tool, ensure that no liquids
enter the tool.
Do not attempt to remove dirt from the infrared sensor (16)
or camera (15) using sharp objects. Do not wipe over the in-
frared sensor and camera (risk of scratching).
Please contact an authorised Bosch after-sales service
centre if you want to have your measuring tool recalibrated.
1 609 92A 7CX | (27.01.2022)
If repairs are required, send in the measuring tool in its ori-
ginal packaging.
The integrated button cell may only be removed for disposal
by qualified personnel.
There are no parts which can be serviced by the user on the
measuring tool. Opening the housing shell can destroy the
measuring tool.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Infrared range
Transport
width × height
(m)
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
–0.5 × 0.4
transport the batteries by road without further require-
–1 × 0.75
ments.
–2.05 × 1.5
When shipping by third parties (e.g.: by air transport or for-
–5.1 × 3.8
warding agency), special requirements on packaging and la-
belling must be observed. For preparation of the item being
shipped, consulting an expert for hazardous material is re-
quired.
Dispatch battery packs only when the housing is undam-
aged. Tape or mask off open contacts and pack up the bat-
tery in such a manner that it cannot move around in the
packaging. Please also observe the possibility of more de-
tailed national regulations.
Disposal
Measuring tools, rechargeable/non-re-
chargeable batteries, accessories and pack-
aging should be sorted for environmental-
friendly recycling.
Bosch Power Tools

Advertisement

loading