Table of Contents
Advertisement
INTEGRAL
Installation
With each unit an electrical 86 x 86 mm box is included.
Contact a professional installer or authorized dealer for
the mounting process.
• Cut a squared hole in the wall to place the electrical
box.
• Place the electrical box and fix it to the wall. Previously
all cabling (speaker outputs, AC power and signal
input) has been installed in the wall with sufficient
length to provide proper stress relief.
• Run the cables out of the wall Through the electrical
box.
• Attach the metal mounting ring to the electrical box
with the provided screws.
• Mount the connectors on the extremes of the installed
cabling.
• Connect the unit (speaker outputs, AC power etc.) and
secure it to the mounting ring.
INTEGRAL-WA2 Manual
9
Advertisement
Table of Contents
