Table of Contents
Advertisement
INTEGRAL
Use
All the main functions can be controlled using the front
panel buttons. More options are available using the re-
mote control. To switch on the unit, change the position
(to the right) of the slide button located at the bottom.
When using an external sound source (line input), be
sure to switch on this unit before the amplifier.
Once the amplifier has been switched on, select the au-
dio source and start playing music. It is recommendable
to start at low levels and increase volume if needed (vol-
ume can be adjusted in 20 different levels).
When setting the unit into standby mode (using the re-
mote controller), it will restart by default reproducing the
latest audio source before being switched off and keep-
ing the same volume.
When switching off the unit from the bottom button, it
won´t keep the audio source previously selected. It will
restart trying to find audio sources in this order:
• Micro SD
• BT
• USB
When connecting the unit via Bluetooth to a mobile de-
vice such a tablet or phone, the displayed name should
be BA-225D. When the link between tablet or phone
and the amplifier has been set, no other devices can be
paired to the unit unless the device has lost the link (be-
cause of the distance) or has been unpaired by the user.
10
INTEGRAL-WA2 Manual
Advertisement
Table of Contents
