Recording settings
Driving mode
Driving mode: Select either Continuous
■
recording or G-Sensor only to be used in
Driving mode.
When changing the Driving mode
recording, the camera will be
formatted automatically. Please back
up all recordings before changing the
channel setting.
G-Sensor sensitivity: Select the desired
■
sensitivity for driving incidents.
Entry phase: Set the Entry phase time from
■
one to five minutes.
Exit phase: Set the Exit phase time from
■
one to five minutes.
Parking mode
Parking mode: Turn Parking mode on or off.
■
G-Sensor sensitivity: Select the desired
■
sensitivity for G-Sensor events in Parking
mode.
Volume settings
Beep sound: Adjust volume for beep
■
sounds.
Voice guidance: Adjust volume for voice
■
guidance.
System settings
Language: Select the language of the voice
■
announcements.
Country/Region: Select the country/region
■
where the camera is used.
Date and time: Activate "Set date and
■
timezone automatically" or set time zone
manually.
16
Voice gender: Select the desired gender for
■
the voice announcements.
Voice recognition: Turn voice recognition
■
on or off and select the language.
Security LED: Turn the security LED on or
■
off (may be mandatory in some countries).
Overlays: Turn on or off. Date, time, speed
■
and GPS will be displayed in the recordings.
Speed unit: Select the desired unit for
■
speed.
GPS: Turn GPS on or off.
■
Factory reset:
■
–
Settings
–
All recordings
–
All recordings & settings
WIFI frequency
The Advanced Car Eye 3.0 device
uses a 5 GHz band to connect to the
smartphone, which provides faster
transmission rates than 2.4 GHz bands.
If the used smartphone does not support
5 GHz, the Wi-Fi frequency will change to
2.4 GHz.