Getting Started - Pivot A20A User Manual

PIVOT CLIP REPLACEMENT GUIDE
1
Pivot Clip
2
Hinge Pin
Remove Hinge Cap
a) Remove device. Follow instructions on pivotcase.com for your case and device type.
b) Remove the hinge cap using the blunt tip of needle-nose pliers and mild leverage to
pry the small cap o . There is a short flange on the edge of the cap for this purpose.

Getting Started

4
Before beginning any clip replacement
Flex
procedure, please ensure you have a
Spring
compatible Pivot Clip Kit. This PIVOT
case uses the PCK-2 Assembly, Gen 2.0. It
is not compatible with older versions of
the PIVOT clip.
3
Hinge Cap
Required:
1 Unit PCK-2 Assembly, Gen 2.0
1pc Pivot Clip
1pc Hinge Pin
1pc Hinge Cap
1pc Flex Spring
15.