Section 2. Safety Advice - Akai ICE104S Manual

Section 2. Safety Advice

· Please read this booklet thoroughly before installing and switching on the
appliance. The manufacturer accepts no responsibility for incorrect installation
and usage.
· Your old appliances contain insulation gases and refrigerant that must be
disposed of correctly. Please ensure that the refrigerant circuit is not damaged
before the appliance is taken away for correct disposal in line with current
legislation. If there is any doubt contact your Local Authority for instructions.
· This appliance is a natural gas with a high level of environmental compatibility;
however, caution is required as
It is essential to ensure that refrigerant tubes are not
and the installation of the
damaged, avoid naked flames or sources of ignition and ventilate the room in
which the appliance is situated.
· If using an adaptor, this must be used in accordance with the manufacturers
instructions and ensure that the electrical circuit is not overloaded as this could
cause overheating.
· Do not twist or bend the cables, and keep them away from hot surfaces.
· Do not plug ın or unplug this appliance with wet hands.
· Following installation make sure that the power cable is not trapped underneath
the appliance.
· Ensure the appliance is left in an upright position for at least 4 hours before you
switch it on.
·
The appliance has to be unplugged after use and before carrying out user
maintenance on the appliance.
isobutene is a flammable gas.
appliance. In the event that the refrigerant circuit is
6
damaged during transportation