Do you have a question about the L411-A and is the answer not in the manual?
Questions and answers
LeDene Lewis
January 22, 2025
hello -- My shredder is brand new -- used for the first time today. It shredded very thin sheets of paper then stopped. It makes noise but does shred. It didn't run long enough to overheat. The bin was not even close to full. There is nothing caught in the shredder. The power source is sufficient, etc.
1 comments:
Mr. Anderson
May 14, 2025
The Bonsaii L411-A is a laminator, not a shredder. If it is making noise but not working properly after initial use, possible causes include:
1. Overheating: After 2 hours of use, the machine must cool down for at least 30 minutes. 2. Blockage: Residue or debris on the rollers may need cleaning using thick paper or special cleaning sheets. 3. Misuse: Inserting sharp or metal objects like staples or paper clips can damage it. 4. Damage: If the power cord is damaged or the machine was tampered with, it may not function correctly.
Unplug the machine and allow it to cool before inspection or cleaning. Do not attempt repairs yourself.
Page 2
IMPORTANT SAFETY INSTRUCTIONS The machine is for indoor use only. Plug the machine into an easily accessible outlet. To avoid electric shocks, the laminator must not be used in humid or wet condi ons and water must never be allowed to come into contact with the machine, the connec on cable or the socket.
Page 3
Descrip on ❶ Power switch (ON/OFF) ❻ Pouch ejector slot (Front) ❷ Power indicator light ❼ An -Blocking switch (ABS) ❸ Mode indicator lights ❽ Pouch tray (Foldaway feeding tray) ❹ Selector bu on ❾ Pouch posi oning aid ❺ Slot for pouch input (Rear) Lamina ng Only use special films designed specifically for lamina ng.
Page 4
1. Turn the machine on by se ng the power switch ❶ to the “I” posi on. The green power indicator light ❷ and the “ 3 mil” indicator light ❸ are ligh ng up. 2. If the machine is not in use, set the power switch ❶ to the “0” posi on and the power indicator (green light) ❷...
Page 5
4. Lay the document to be laminated into a lamina ng pouch of the appropriate size. Make sure that all corners of the document have at least two millimeters of space from the edge of the lamina ng pouch. 5. Now lay the lamina ng pouch, sealed side first on the pouch tray ❽ . Adapt the pouch posi oning aid ❾...
Page 6
Delivery: Laminator Film Instruc on manual Technical Data 120VAC, 60Hz 9.45 inches 13.39 x 4.80 x 3.54 inches 3 minimum, 5 maximum 11.81 inches/min Warranty The warranty for this appliance is for 12 months from the date of purchase. The appliance has been manufactured with care and examined before delivery.
Need help?
Do you have a question about the L411-A and is the answer not in the manual?
Questions and answers
hello -- My shredder is brand new -- used for the first time today. It shredded very thin sheets of paper then stopped. It makes noise but does shred. It didn't run long enough to overheat. The bin was not even close to full. There is nothing caught in the shredder. The power source is sufficient, etc.
The Bonsaii L411-A is a laminator, not a shredder. If it is making noise but not working properly after initial use, possible causes include:
1. Overheating: After 2 hours of use, the machine must cool down for at least 30 minutes.
2. Blockage: Residue or debris on the rollers may need cleaning using thick paper or special cleaning sheets.
3. Misuse: Inserting sharp or metal objects like staples or paper clips can damage it.
4. Damage: If the power cord is damaged or the machine was tampered with, it may not function correctly.
Unplug the machine and allow it to cool before inspection or cleaning. Do not attempt repairs yourself.
This answer is automatically generated
Laminator is not warm or sealing the documents