XS1B Aircraft Water Filter
Part No. EV941000
FAA-PMA APPROVED
BENEFITS
•
Improves aircraft water by reducing chlorine taste and odor
and other off tastes and odors
•
Filters out dirt and other suspended matter
•
Vessel made of durable "300 Series" stainless steel
•
Designed for use with all Everpure D-Clor™ Cartridges
•
FAA-PMA Approved
INSTALLATION TIPS
•
To service, shut off influent water supply, open service tap,
remove the V-Band Clamp, and unscrew cartridge.
•
After replacing cartridge, air should be released from the top
vent.
•
Flush the cartridges by running water through filter at
full flow at the service tap for three minutes, or until
water runs clear.
OPERATION TIPS
•
Change cartridges as indicated on the cartridge data sheet.
Always flush new filter cartridges at the time of
•
installation.
INLET AND OUTLET CONNECTIONS
•
Bottom IN / Bottom OUT
•
Inlet and Outlet: 9/16-inch
REPLACEMENT CARTRIDGES
•
All D-Clor™ cartridges reduce chlorine taste and odor, and
other taste and odor while filtering out dirt and suspended
matter. See chart for different pressure drop characteristics.
•
In addition to reducing taste and odors, the 150GP cartridge
inhibits limescale build-up. Limescale prevention is particularly
important in applications involving hot water heaters and
coffee makers.
XS1B Assembly
P/N EV941000 (1 pack)
Top Vent
— 18NF (3/8-inch tube union)
Premium Quality Water Filtration
Created for Use in Aircraft
150B D-Clor™
Replacement
Cartridge
P/N EV949812
(12 Pack)
150GP D-Clor™
Replacement
Cartridge
P/N EV949212
(12 Pack)
PRESSURE DROP CHARACTERISTICS
25
S1B Shell Only
S1B w/150G cartridge
20
S1B w/150GP cartridge
S1B w/150GY cartridge
S1B w/150B cartridge
15
10
5
0
0
0.5
FLOW RATE (GPM)
150G D-Clor™
Replacement
Cartridge
P/N EV949000
(12 Pack)
150GY D-Clor™
Replacement
Cartridge
P/N EV949012
(12 Pack)
1
1.5
2
2.5