Page 2
WARNING! WARNING: Only authorized Lauten Audio technicians should perform disassembly and maintenance on any part of this microphone. Disassembling and modifying any part of this microphone may void its warranty. NEVER DISASSEMBLE THE MICROPHONE WHEN POWER IS BEING SUPPLIED. WARNING...
Page 3
A message from the founder Congratulations and thank you for your purchase of the LT-381 Oceanus tube condenser microphone. Your microphone was designed and built with pride by Lauten Audio. We are dedicated to providing recordists throughout the world with authentic, high quality, great sounding microphones.
Table of Contents Safety/Contents/Introduction Quick Start Guide/Sequence of Operation Description Power Requirements Connections Recommended Uses Placement and Techniques Care and Cleaning Technical Specifications...
Page 5
Safety/Contents/Introduction Safety Please make sure the equipment your microphone will be connected to meets or exceeds the safety regulations in force in your country and is utilizing a ground lead. Never disassemble any part of your microphone while power is being supplied to it. Contents LT-381 Oceanus microphone •...
Quick Start Guide/Sequence of Operation To insure proper function of your microphone please set up the microphone using the following sequence. 1. Securely attach the microphone shock mount to a high quality microphone stand and tighten the wing nut at the shock mount elbow. The LT-381 is heavier than many microphones on the market and we highly recommend using a heavy duty stand.
Description The LT-381 Oceanus large-diaphragm multi-pattern condenser microphone has been thoughtfully designed with the feedback from sound engineers working in recording studios for many years. Using premium quality, reliable components, this microphone will withstand use in a recording studio for many years. The circuit topology is unique and offers increased clarity and transient response over other microphones on the market.
Power Requirements The LT-381 microphone requires power from the included LT-381 power supply. Phantom power should not be supplied to this microphone. This microphone will not work properly with any other power supply. Please make sure you select the proper power supply voltage (Figure 2) for your country (i.e.
Connections This microphone requires two connections, one from the microphone to the power supply “MIC IN,” and one from the power supply “OUT” to your recording interface or preamplifier. Always use a high quality 3-pin XLR microphone cable from the power supply “OUT” to your recording interface or preamplifier.
Recommended Uses The LT-381 Oceanus is designed to offer you very full and detailed vocal recordings. We recommend using the LT-381 for micing vocals and also for distance micing as overheads or room mics. The LT-381 may also be used to mic various other sources including but not limited to those listed below.
Placement and Techniques Below are general tips for microphone placement; the recording environment plays a significant role in the success of any technique. We suggest experimenting extensively. Lead/Solo Vocals Distance from source: 4 to 12 inches. Pattern: Cardioid, use pop screen or foam windscreen. Distance from source: 4 to 12 inches.
Care and Cleaning THERE ARE NO SERVICABLE PARTS INSIDE THE MICROPHONE OR POWER SUPPLY. Only authorized Lauten Audio technicians should perform disassembly and maintenance on any part of this microphone. Disassembling and modifying any part of this microphone may void its warranty. NEVER DISASSEMBLE ANY PART WHEN POWER IS BEING SUPPLIED.
Page 13
Frequency Response and Polar Pattern Plots Cardioid Omnidirectional Figure-8...
Need help?
Do you have a question about the OCEANUS LT-381 and is the answer not in the manual?
Questions and answers