Technicolor OWA0131 Quick Start Manual

Tips and Tricks
HOW TO REPAIR AN UNRESPONSIVE WI-FI EXTENDER
If at some point your Wi-Fi extender becomes unresponsive you can:
• Force it to restart:
All of the EasyMesh settings are retained.
Simply power cycle the OWA0131 using the on/off button
• Reset it to factory defaults:
The OWA0131 restarts with the factory default configuration.
None of the Wi-Fi and EasyMesh settings, nor other configuration changes you
have made to the OWA0131 are retained.
Make sure that your Wi-Fi extender is turned on.
Using a paperclip push and hold the recessed Reset button on your Wi-Fi extender
for 5 seconds:
The LED will flash red and the OWA0131 will reboot.
UNDERSTANDING THE OWA0131 MULTI-FUNCTION LED
START UP SEQUENCE
Orange Solid / Dimmed
Orange Flashing - fast
Orange Flashing (1 sec on/off)
WI-FI PAIRING
Green Flashing (1 sec on/off)
Green Solid
Red Flashing - fast
Orange / Green Flashing (1 sec / 1 sec)
Orange / Green Flashing (3 sec / 1 sec)
Orange / Green Flashing (1 sec / 3 sec)
Orange Solid
Green Solid
Red Solid
WPS CLIENT PAIRING
Green Flashing (1 sec on/off)
Red Flashing - fast
OTHER
Red Flashing (1 sec on/off)
Green Flashing - fast
Start up
Initialising Wi-Fi
Ready for WPS
WPS pairing
WPS paired
WPS error
EasyMesh onboarding
EasyMesh failed
EasyMesh u/s failed
Location not optimal
Location optimal
Location poor, move closer
WPS pairing
WPS error
Returning to factory defaults
Software upgrade in progress
OWA0131
Wi-Fi 6 EXTENDER
QUICK
SET-UP
GUIDE