Advertisement
Locking Feature
PAD100-SB include a locking feature that prevents removal of the detector and removal of the base
cover without using a tool.
1. To eliminate this feature, break off the locking tab and then install the detector.
2. To remove the detector from the base once the locking feature has been activated, insert a small
screwdriver into the slot on the base to push the plastic tab while simultaneously turning the detector
head counter-clockwise.
3. To remove the base cover from the lower enclosure once the locking feature has been activated,
insert a small screwdriver into the slot on the on the base to push the plastic tab while simultaneously
turning the detector head counter-clockwise.
Model Number
Note: Approvals/Listings maintained by and manufactured by Potter Electric Signal Company.
1102 Rupcich Drive
Millennium Park
Crown Point, IN 46307
TEL: (219) 663-1600 FAX: (219) 663-4562
e-mail: info@janusfiresystems.com
www.janusfiresystems.com
DS1348
Revised: 20-Aug-2019
Insert small screwdriver
into slot to remove
detector from base.
Description
PAD100-SB
Addressable Sounder Base
The seller makes no warranties, express or implied, including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose, except as expressly stated in the seller's sales contract or sales acknowledgment form. Every
attempt is made to keep our product information up-to-date and accurate. All specific applications cannot be covered, nor can
all requirements be anticipated. All specifications are subject to change without notice.
Break off tab (gray
area) in image to disable
locking feature.
Ordering Information
Page 2 of 2
P/N
97674
Advertisement
