Eton Cell Phone Accessories Owner's Manual page 9

Self-powered safety hub with am/fm/weather alert radio and usb cell phone charger turbodyne series
Table of Contents

Advertisement

Available languages

Available languages

AXIS OWNER'S MANUAL
CHARGING CELL PHONES
If your cell phone has a USB charging cord, you can use it. If not,
you can purchase one from www.iGo.com, or call 1-888-205-0093.
To purchase a charging tip and cord for your cell phone, go to
www.iGo.com, or call 1-888-205-0093. Purchase USB charging
cable model# PS00271-0003 and have the brand and model of
your cell phone ready to purchase the tip.
To use the cell phone's USB charging cord, connect it to the
radio's large USB socket (located under the rubber cover on
the back of the radio.) Press the CELL button and the battery
power will directly dump charge to your cell phone. The Axis
will only charge your cell phone if the battery indicator shows
it at half full, or two bars. To charge your cell phone with a low
battery, turn the crank for 7 minutes at 130 rpm to charge the
cell phone enough to talk for about 5 minutes.
The Axis has a low voltage protection circuit to avoid the battery
from dropping too low in voltage from cell phone charging. If the
battery symbol on the LCD display shows three bars, it can support
cell phone charging. When the battery symbol is blinking, it stops
charging your cell phone and you are urged to re-charge the battery
until the blinking stops so that cell phone charging can resume.
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Turbodyne axisArcpt300w

Table of Contents