Page 5
STEP 1 Rail should be disconnected before tighten MNX After tighten MNX (STEP 11) rail can be connected MNX - 02 KVL 01 MNX-02 x 6 MNX-02 x 6 KVL-01 x 4 D-R/D-L MNX-02 x 4 MNX-02 x 3 KVL-01 x 4 K X 4 VIDEO KVL-01 x 8...
Page 6
STEP 2 B (FRONT FACE) MNX - 02 KVL 01 MNX-02 x 6 B (BACK FACE) MNX-02 x 3 KVL-01 x 4 KVL-01 x 4 G x 2 L x 3 KVL-01 x 4 VIDEO KVL-01 x 4 link Page 5...
Page 7
STEP 3 210° MNG - 01 MNG-01 x 4 STEP 4 MNG - 01 210° MNG-01 x 2 VIDEO link Page 6...
Page 8
STEP 5 MNG - 01 KVL-01 x 12 210° MNG-01 x 3 VIDEO link Page 7...
Page 9
STEP 6 MNG - 01 MNG-01 x 5 VIDEO 210° link Page 8...
Page 10
STEP 7 MNG - 01 MNG-01 x 6 210° STEP 8 MNG - 01 MNG-01 x 8 210° VIDEO link Page 9...
Page 11
STEP 9 H-01 x 3 STEP 10 MNG-01 x 6 210° VIDEO link Page 10...
Page 12
STEP 11 SPT-01 STP - 01 SPT-01 PM - 01 x 16 VIDEO TAP - 01 link Page 11...
Page 13
VD - 02 x 16 STEP 12 CAUTION DO NOT UNLOCK BEFORE INSTALL STEP 13 MKZ - 02 (L/R) VIDEO IM - 01 AL - 02 link Page 12...
Page 14
ATTENTION!!! Must be secured to the wall made of brick, concrete or similarly strong material. STEP 14 Mounting to wooden or metal studs is also acceptable. Do not mount directly to sheetrock or paper-mache type walls not supported by studs. DD - 01 Ø...
Page 15
WALLS MADE OF DRYWALL WITH WOODEN OR METAL STUDS STEP 14-1 Ø 10 mm / 0,254 inc FİRST LOCATE THE STUDS BY USİNG ''STUD FİNDER'' İN THE WALL AND DRİLL İT ACCORDİNG TO THE HEİGHT MEASURMENTS GİVEN ON THE SİDE. UPPER HOLES SHOULD BE DRİLLED FOR ATTACHİNG BED AT NEXT STEP .
Page 16
STEP 15 45-50 LET THE STOPPER LOCK MOVE DOWN !!! VIDEO link Page 15...
Page 17
STEP 16 SC-61 x2(L/R) CT - 01 OT - 054 AL - 01 VIDEO KKS - 01 X 2 link Page 16...
Page 18
STEP 17 KMT - 01 VTB - 02 X 4 KMT - 01 TTC 01 X 2 TTC 01 X 2 VIDEO link Page 17...
Page 19
STEP 18 KBP - 01 KOR 02 KBP - 01 YSB - 02 X 2 CAUTION ! MAKE SURE THAT HEADBOARDS AND GUARDRAILS ARE FOLDED BEFORE CLOSING THE BED KBP - 01 KLF 02 (fabric cover) KOR 02 VIDEO link Page 18...
Page 20
STEP 19 MNX-02 x 2 MNX - 02 KVL 01 KVL-01 x 4 MNG-01 x 4 210° STEP 20 VDA - 01 x 6 VIDEO AL - 02 link Page 19...
Page 21
STEP 21 VKP - 01 x 2 KP - 01 SPT-01 VIDEO link Page 20...
Page 23
With seasonal humidity change please inspect the interior and exterior of the furniture for deformation and/or discoloration. Before any un-mounting or disassembly please contact Multimo Beds for technical support and instructions. Failure to properly detach may result in personal injury and damage to property.
Need help?
Do you have a question about the PARETE LETTO A 214 and is the answer not in the manual?
Questions and answers