Advertisement
4
Power/Signal
indicator
5
DC5V input
6
S/PDIF out
7
HDMI output
8
IR in
9
IR out
Installation Procedures
1. Connection
One to one:
Follow the standard of IEEE-568B, It is recommended to
select a network cable with less loss and crosstalk.
1-Orange/white
4-Blue
7-Brown/white
2. Connection instruction
1 ) Connect the source device to the HDMI in port of the transmitter with an HDMI cable,
and connect the HDMI out port of the receiver to the display device with another HDMI
cable.
2 ) Connect the CAT out port of the transmitter and the CAT in port of the receiver via a
When there is power and no HDMI signal, the indicator will flash, when there is
HDMI signal, the indicator will light solid blue
Connect with DC5V/2A power adapter
Output digital audio signal.
Connect with HDMI display device
Connect with IR receiver extension cable, please make sure the remote control
used is within the effective range
Connect with IR blaster extension cable, please get closer to the source device
while using
2-Orange
5-Blue/white
8-Brown
3-Green/white
6-Green
Advertisement
