Advertisement
3
Power/Signal
indicator
4
DC5V input
5
HDMI output
6
HDMI input
7
IR in
8
IR out
2. Receiver (RX)
1
Reset button
2
Audio switch
3
RJ45 signal input
When there is power and no HDMI signal, the indicator will flash, when there is
HDMI signal, the indicator will light solid blue
Connect with DC5V/2A power adapter
Connect with HDMI display device
Connect with the source device
Connect with IR receiver extension cable, please make sure the remote control
used is within the effective range
Connect with IR blaster extension cable, please get closer to the source device
while using
Press to restart the device
Choose to decode audio from HDMI or ARC output from fiber optic interface
Connect with network cable
Advertisement
