Download Print this page
Predator 58169 Owner's Manual & Safety Instructions

Predator 58169 Owner's Manual & Safety Instructions

43cc 2-stroke gas powered cultivator

Advertisement

Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Owner's Manual & Safety Instructions
Save This Manual
Save This Manual
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Keep this manual and the receipt in a safe and dry place for future reference.
Keep this manual and the receipt in a safe and dry place for future reference.
Using an engine indoors
CAN KILL YOU IN MINUTES.
Engine exhaust contains carbon monoxide.
This is a poison you cannot see or smell.
NEVER use inside
a home or garage,
EVEN IF doors and
windows are open.
When unpacking, make sure that the product is intact
When unpacking, make sure that the product is intact
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
and undamaged. If any parts are missing or broken,
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
please call 1-888-866-5797 as soon as possible.
please call 1-888-866-5797 as soon as possible.
©
©
©
Copyright
Copyright
Copyright
2021 by Harbor Freight Tools
2021 by Harbor Freight Tools
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly,
Keep this manual for the safety warnings and precautions, assembly,
Only use OUTSIDE
and far away from
windows, doors,
and vents.
®
®
®
. All rights reserved.
. All rights reserved.
. All rights reserved.
Visit our website at: http://www.harborfreight.com
Email our technical support at: predator@harborfreight.com
Read this material before using this product.
Read this material before using this product.
Read this material before using this product.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
SAVE THIS MANUAL.
58169
21k
21k

Advertisement

loading
Need help?

Need help?

Do you have a question about the 58169 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Predator 58169

  • Page 1 Visit our website at: http://www.harborfreight.com windows are open. and vents. Email our technical support at: predator@harborfreight.com When unpacking, make sure that the product is intact When unpacking, make sure that the product is intact When unpacking, make sure that the product is intact and undamaged.
  • Page 2: Table Of Contents

    2800 ± 280 RPM The emissions control system for this Engine is warranted for standards set by the U.S. Environmental Protection Agency. For warranty information, refer to the last pages of this manual. Page 2 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 3: Safety

    Risk of Fire. Read the manual before Do not refuel while operating. set-up and/or use. Keep flammable objects away from engine. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 2. Never allow children to operate the other people, their property, and themselves. equipment. Never allow adults to operate the equipment without proper instruction. Page 4 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 5 Caution is necessary when near the engine’s magneto or recoil starter. 10. Never operate the machine without proper guards, plates, or other safety protective devices in place. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 Keep hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts. Page 6 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 7 5. Wipe up any spilled fuel and allow excess dust mask/respirator during service. to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. SAVE THESE INSTRUCTIONS. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8: Setup

    Bar Assembly (25) in place. Axle  / Drag Bar Assembly Clevis 2. Remove the Clevis Pin from the Axle  /   D rag Bar Assembly. Axle  / Drag Bar Assembly Page 8 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 9 Drag Bar facing up as shown for moving the Cultivator before and after use. For cultivating change the direction to the working position with the Drag Bar facing down. Working position ITEM 58169 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 M8  x   4 5 Washers (59), and Knobs (15). Make Capscrew sure the Knobs are on the outside. Ø8 Flat Washer, Ø8 Lock Washer & Knob 3. Completed Handle Assembly. Page 10 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 11 Components and Controls Engine Switch Throttle Control Lever Starter Fuel Handle Tank Filter Choke Choke Prime Prime Bulb Bulb Tines ITEM 58169 For technical questions, please call 1-888-866-5797. Page 11...
  • Page 12: Operation

    Before Starting the Engine a. Inspect the equipment and engine. b. Fill the engine fuel tank with the proper amount and type of stabilizer- treated unleaded gasoline and 2-cycle oil mixture. Page 12 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 13 Repeat until the Engine starts. Note: Do not let the Starter Handle snap back against the Engine. Hold it as it recoils so it doesn’t hit the Engine. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Under normal operating conditions subsequent maintenance follows the schedule explained in the MAINTENANCE section. NOTICE See Long-Term Storage on page 19 for complete storage instructions. Page 14 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 15 Cultivator. If any damage is found have the problem stop the Tines from turning, and how to stop the corrected before further use. Engine. For actual field use, operate at a slow pace until familiar with Cultivator handling. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16: Maintenance

    Many maintenance procedures, including any not detailed in this manual, will need to be performed by a qualified technician for safety. If you have any doubts about your ability to safely service the equipment or engine, have a qualified technician service the equipment instead. Page 16 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 17 2. Clean carbon build-up from combustion chamber Replace fuel line if necessary Service more frequently when used in dusty areas. These items should be serviced by a qualified technician. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 17...
  • Page 18 6. Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. Page 18 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 19 Engine stalls from lack of fuel. the Engine with an improper mixture WILL permanently damage the Engine. Use freshly e. Replace Fuel Tank Cap and tighten securely. mixed fuel when starting the Engine after storage. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 19...
  • Page 20: Troubleshooting

    (Hissing noise will If that does not remedy problem, occur when trying to start.) replace head gasket. Follow all safety precautions whenever diagnosing or servicing the equipment or engine. Page 20 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 21 Engine Engine and limit damage. runs but Tines do not rotate Follow all safety precautions whenever diagnosing or servicing the equipment or engine. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 21...
  • Page 22: Parts Lists And Diagrams

    Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175433749 when ordering parts. Page 22 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 23 Main Assembly Diagram ITEM 58169 For technical questions, please call 1-888-866-5797. Page 23...
  • Page 24 Fuel Tank Cap Assembly Piston Pin Rubber Washer Piston Ring Carburetor Cover When ordering replacement parts from this list, the “A” suffix must be included in order to get the correct part. Page 24 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 25 Engine Assembly Diagram ITEM 58169 For technical questions, please call 1-888-866-5797. Page 25...
  • Page 26: Warranties

    (2) year term of this warranty at no cost to you, including diagnosis, parts and labor. This warranty applies to the original purchaser and any subsequent owner within the two year warranty period. Page 26 For technical questions, please call 1-888-866-5797. ITEM 58169...
  • Page 27 The nearest Harbor Freight Tools retail store can be found on the internet at http://www.harborfreight.com. ITEM 58169 For technical questions, please call 1-888-866-5797. Page 27...
  • Page 28 pLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Save PDF