Getting Connected
JVC DVR Link
The JVC DVR Link app is an integrated application that allows
you to view, share and back up the videos recorded on a
dashboard camera via wireless LAN. Search for "JVC DVR Link" in
Apple App Store or in Google Play Store to download the app for
free.
Note:
The JVC DVR Link app is compatible with iOS 9.0 (and above)
and Android 5.0 (and above) devices. JVCKENWOOD does
not guarantee the productʼs compatibility with smartphones
from all manufacturers.
App Store is a service mark of Apple Inc., registered in the
U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S.
and other countries and is used under license.
Android and Google Play are trademarks of Google LLC.
Setting up a Wireless Connection
On your device, select
wireless LAN mode. Once enabled, the wireless LAN setting
screen displays the SSID and password of the device.
On your smartphone, follow the steps to set up the wireless
connection.
1. Enable the wireless LAN function on the smartphone.
2. Open the JVC DVR Link app and follow the on-screen
instructions to set up the connection.
Open the wireless LAN setting of the smartphone to display
the detected devices. From the list, select the device you
want to connect to and then enter the password.
The next time you use your smartphone to connect to the
device, you will not be prompted to enter the password
again unless you reset your phone to the factory default
settings.
Note: The instructions about operating the smartphone are for
reference only. The actual setting options and methods may vary
depending on your phone type/model and the app version.
> Wireless LAN > On to enable the